"Aluminium interior" covers a lot of ground — kitchen cabinetry, wardrobe carcasses, decorative wall cladding, ceiling features and room partitions can all be built in aluminium. That breadth is exactly why a single price-per-square-foot figure can be misleading: a flat cladding panel and a fully-fitted aluminium kitchen are priced on completely different bases. So this guide breaks the cost down by application, gives indicative ranges, and explains what decides where your project lands.
We fabricate aluminium interiors in-house in Fujairah and install across all seven emirates, so these figures reflect real UAE market conditions in 2026 — not generic numbers.
Why aluminium for interiors at all?
Before cost, it helps to understand why aluminium is specified so often in UAE homes. Timber and MDF can struggle in Gulf conditions — humidity and the occasional leak cause swelling, warping and delamination over the years, and termites are a real risk. Aluminium doesn't absorb moisture, doesn't warp, won't feed termites, is non-combustible, and takes powder-coat colours and convincing woodgrain finishes that last. For kitchens, bathrooms, wardrobes and any humidity-exposed area, that durability is the whole argument.
Aluminium interior cost by application (2026, indicative)
These are indicative supplied-and-installed ranges to help you budget — a real quote always depends on your design, finish and site. Note that some items are naturally priced per square foot (cladding, partitions) while cabinetry is usually quoted per linear metre, shown here converted to an approximate per-square-foot basis for comparison:
| Aluminium interior element | How it's usually priced | Indicative range |
|---|---|---|
| Wall cladding / panelling | Per sq ft | AED 40–120 / sq ft |
| Decorative / 3D feature panels | Per sq ft | AED 90–200 / sq ft |
| Room partitions (framed/glazed) | Per sq ft | AED 50–150 / sq ft |
| Kitchen cabinetry (aluminium) | Per linear m (≈ per sq ft of face) | AED 150–400 / sq ft of face |
| Wardrobes / storage | Per sq ft of face | AED 120–320 / sq ft |
| Ceiling features / slats | Per sq ft | AED 60–160 / sq ft |
What drives the per-square-foot figure
Within those ranges, five things decide your number:
- System and profile — a simple sheet-clad panel costs far less than an engineered profile system with concealed fixings.
- Thickness and grade — heavier-gauge aluminium and marine-grade alloys cost more but last longer and feel more solid.
- Finish — standard powder-coat colours are cheapest; premium metallics, anodised finishes and realistic woodgrain sublimation cost more.
- Complexity — curves, 3D patterns, integrated lighting and tight tolerances add fabrication time.
- Site and access — height, the number of cut-outs and how easy the space is to work in all affect installation cost.
"The honest way to read 'cost per square foot' for interiors: treat it as a budgeting starting point, not a quote. Two aluminium kitchens of the same size can differ by 60% on finish and hardware alone."
Aluminium vs the alternatives, on cost
For cladding and partitions, aluminium is genuinely cost-effective — competitive upfront and very low-maintenance over its life. For cabinetry, quality aluminium typically sits around or a little above mid-range timber/MDF on day one, but the lifetime maths often favours it in the UAE: it won't swell from a leak under the sink, won't warp in a humid kitchen, and won't need replacing as soon. If your priority is the lowest possible upfront cost and the area stays dry, laminate MDF still wins on price; if you want longevity in a kitchen, bathroom or anywhere humid, aluminium earns its premium.
How to get an accurate number for your project
Because interiors are so design-dependent, the only reliable figure is a written quote. The fastest way to get one is to send us your floor plan or room dimensions, tell us the elements you want (kitchen, wardrobes, cladding, partitions), and your preferred finish. We'll come back with an itemised quote rather than a vague per-foot rate.
Send us your plan or dimensions and the finish you're after — we'll reply with a detailed, itemised quote within 2 hours during working hours.
Frequently Asked Questions
How much does an aluminium interior cost per square foot in the UAE?
As a 2026 guide, roughly AED 40–120 per square foot for wall cladding and panelling, AED 50–150 for partitions, and more for cabinetry (usually quoted per linear metre). The system, finish, thickness and installation all move the figure, so we confirm with a written quote.
Is aluminium interior better value than wood?
For dry decorative areas at the lowest upfront cost, laminate MDF is cheaper. For kitchens, bathrooms, wardrobes and humid areas, aluminium usually wins on lifetime value because it won't warp, swell or attract termites in UAE conditions.
Do you fabricate and install across the UAE?
Yes. We fabricate aluminium interiors in our Fujairah workshop and install across all seven emirates. Delivery and installation are included in the quote based on your location.
